DT Series Data Loggers

Setting up a Piezometer in DT Logger Host for a DT2011B Data Logger
Test - If setting up a DT2011B data logger with a piezometer, follow these instructions.
Tue, 17 May, 2022 at 4:08 PM
How to Set up a wireless communication between a DT series Data Logger with a L900 RSTAR Node and FlexDAQ with L900 RSTAR RTU using DT Logger Host Software.
Scenario: customer needs to connect a DT Series Data Logger to a FlexDAQ via RSTAR L900 RTU/ Node and DT Logger  Host Software. Solution: follow the ste...
Tue, 6 Jul, 2021 at 9:33 AM
DT Logger Host - Communication Troubleshooting (Status 0, 2 and 3 Warnings)
Troubleshooting Status 0, 2 and 3 warnings communication issues for DT data loggers.
Tue, 17 May, 2022 at 4:05 PM
DT2011B VWP Default kPa Calculation Spreadsheet
Use this to convert raw data into the kPa and then the conversion of choice.
Tue, 17 May, 2022 at 4:06 PM
DT2011B VWP Default MPa Calculation Spreadsheet
Use this with the associated Cal Record to calculate the MPa then convert to output of choice. 
Tue, 17 May, 2022 at 4:07 PM
DT Loggers (DT2011B, DT2055B, DT2040, etc.) setting consideration on application with Vibrating Wire Crack Meters.
When setting up the DT Loggers (DT2011B, DT2055B, DT2040, etc.) to read and display the Engineering Unit of Crack Meter value, e.g., in mm, there is an i...
Fri, 24 Jun, 2022 at 3:19 PM