DATA LOGGERS
RST Instruments’ Data Loggers nodes and hubs collect and store data from a wide variety of geotechnical sensors and gauges, including vibrating wire and digital microelectromechanical systems (MEMS). They can automatically collect data from the sensor outputs and can be programmed to trigger an alarm when a reading reaches a pre-set critical threshold.
In order to configure Multichannel DT2055B logger with VW piezometers, please follow the steps below. 1- Connect the VW piezometer wires to the data lo...
Mon, 8 Nov, 2021 at 12:14 PM
To set up a DT2055B data Logger with a 3 Point VW MPBX, please follow the steps below. 1. Connect to the DT2055B Data Logger with DT Logger Host Software....
Tue, 9 Nov, 2021 at 8:25 AM
This document is intended to be a supplement to the DT Logger Host software manual as it assumes users have a basic understanding of setting up DT series da...
Tue, 6 Feb, 2024 at 9:10 AM
1. Connect the USB cable between the PC and the DTSAA logger. Launch DT Logger Host Software (version 1.19.1+) and wait until the connection is establish...
Wed, 1 Dec, 2021 at 9:47 AM
When connecting the VW piezometer wires to the data logger, the wires should be connected to the proper terminal positions on the terminal block. ...
Mon, 27 Jun, 2022 at 1:15 PM
On a VW Load cell, there are between 3, 4 or 6 gauges and a thermistor connection. Each has to be set up as a separate channel in the data logger. In the ca...
Tue, 28 Jun, 2022 at 11:16 AM
When connecting the VW Crack Meters or Joint Meters wires to the data logger, the wires should be connected to the proper terminal positions on the terminal...
Tue, 28 Jun, 2022 at 11:18 AM
DT 2485 Series Data Loggers are supporting RST Bus Sensors like IPI (version 3 and 4), Tilt Meters and Precision Liquid Settlement Array Sensors. When setup...
Mon, 11 Jul, 2022 at 9:32 AM
When connecting the VW piezometer wires to the data logger, the wires should be connected to the proper terminal positions on the terminal block. ...
Mon, 11 Jul, 2022 at 10:31 AM
Scenario: Customer needs to wire a RST Thermistor String to RST DT2055B Data Logger. Solution: Follow the steps in the guide below to do the job. This...
Fri, 2 Feb, 2024 at 9:00 AM