How to check the Xbee Frequencies of the DT Logger

  1. Connect the Logger to DT Logger Host.
  2. Click on the Wireless Settings

Graphical user interface, text, application, email

Description automatically generated

  1. Click on RSTAR Settings

Graphical user interface, text, application

Description automatically generated

  1. Click on Advanced

Graphical user interface

Description automatically generated

 

  1. Click on Query Logger

Graphical user interface, application

Description automatically generated

 

  1. Click on Frequencies

 Graphical user interface, application

Description automatically generated

The following table will show the frequencies of the Xbee module installed inside the DT logger.

 

A picture containing text, electronics

Description automatically generated

For USA/ Canada, it is from Channel 1 (902.4MHz) to Channel 63 (924.4MHz), except 910 MHz.

 

For Australia, it shows Frequencies Modified from Channel 34 (915.6 Mhz)  to Channel 63 (927.6 MHz).

Graphical user interface, application

Description automatically generated

 

Table

Description automatically generated