RST Instruments Ltd

MEMS DIGITAL IN-PLACE INCLINOMETER SYSTEM 2

• How to pair an older inclinometer reel with a newer Field PC
• How to convert Borehole File to output .rpp files in the RST Field PC.

Other Frequently Asked Questions 1

• Neat Grout vs. Bentonite Grout

VW2106: READOUTS 7

• VW2106 - Programming Piezometer Locations using RST Readout Host
• VW2106 - Discharging the low power capacitor when a VW2106 will not turn on
• VW2106 - Choosing the proper connection port
• Espanol - Decarga del condensador de baja potencia
• How to use VW2106 Read Out to set up VW Load Cells

View all 7

SHAPEARRAY SAAV 2

• How to install Shape Array SAAV Sensor Into Existing Inclinometer Casing
• How to enable the feature “Read Top Segment last” for SAA Sensor

SG350: BRIDGE TRANSDUCER READOUT 2

• Programming a load cell calibration into a SG350 Readout
• How to transfer Site Files Between RST Readouts

FLEXDAQ DATA LOGGERS 19

• How to Set up a wireless communication between a DT series Data Logger with a L900 RSTAR Node and FlexDAQ with L900 RSTAR RTU using DT Logger Host Software.
• How to setup CR6 with LoggerNet (applicable to other CR series loggers)
• How to update table definitions to fix common issue with data collection
• How to update firmware of RTU to fix data error issues
• How to setup FlexDAQs to connect with a base station

View all 19

PIEZOMETERS 6

• VW Piezometer kPa/MPa Calculation Spreadsheet
• Pneumatic Piezometer - Working principle
• Saturation Procedure for VW2100MM - Micro-Miniature VW Piezometers
• How to connect a RST Multi-point Piezometer String VMP to RST DT Logger
• How do Pneumatic Piezometer works?

View all 6

IN-PLACE TILTMETER / SUBMERSIBLE TILTMETER (MEMS) 1

• How to Quick-Start Digital Portable Tiltmeter

VIBRATING WIRE LIQUID SETTLEMENT SYSTEM 3

• How to purge air out of a D'Aerator
• How to test a tape and reset a reed switch of RST Magnetic Settlement System
• How to program the timer on a D’Aerator

CRACK METERS & JOINT METERS 1

• How to Set up a Crack Meter and Joint Meters in DT2011B Data Logger

STRAIN GAUGES & STRAIN METERS 1

• How to setup a DT2011B Data Logger with a VW Strain Gauge Sensor

THERMISTORS 2

• How to connect Thermistor String with DT2040 Data Logger
• How to make ganged common connections for Thermistor String in DT2040 Data Logger

VIBRATION AND OVERPRESSURE INSTANTEL 1

• How to reset Instantel Micromate

DT LINK WIRELESS DATA COLLECTION FROM DATA LOGGERS 7

• How to connect DTLink Loggers to DT Link Wireless Hub
• How to setup wireless communication between DT Loggers and FlexDAQ
• How to connect DT Loggers to DTLink Wireless Hub using DT Loggers Host Software
• How to Upgrade a DT Logger to a DT Link Enable Logger and setup wireless communication between DT Loggers and DT Link Hub
• DTLink - Radio mismatch warning after decryption

View all 7

DATA LOGGERS 19

• DT2011B VWP Default kPa Calculation Spreadsheet
• DT2011B VWP Default MPa Calculation Spreadsheet
• How to fix “Port Closed” error when a DT Logger is connected to DT Logger Host
• DT Loggers (DT2011B, DT2055B, DT2040, etc.) setting consideration on application with Vibrating Wire Crack Meters.
• How to setup a DT2011B Data Logger with a VW piezometer

View all 19

INCLINALYSIS DIGITAL INCLINOMETER SOFTWARE 4

• How to adjust boreholes after Adding or Removing inclinometer casing
• How to convert CSV data files to RPP data files for use with DigiPro software
• How to transfer CP3 Digital Inclinometer Data vis USB to a computer
• Inclinalysis - Changing Values on the X Axis

DIGITAL INCLINOMETER SOFTWARE FOR FIELD PC READOUTS 3

• How to copy files from RST FieldPC2 to PC or memory stick
• How to convert Data File in a RST Field PC from .csv to .rpp for use in DigiPro software.
• How to modify RST Field PC CSV borehole base files to output RPP format files for use with DigiPro software

DIGITAL INCLINOMETER APP 1

• Android Digital Inclinometer App Hot Sheet

DT LOGGER HOST SOFTWARE 5

• Setting up a Piezometer in DT Logger Host for a DT2011B Data Logger
• DT Logger Host - Communication Troubleshooting (Status 0, 2 and 3 Warnings)
• How to resolve Memory Pointers Range Error
• How to update firmware for RST DT Data Logger
• DT Logger Host - Communications Troubleshooting – (Status 0, 2 and 3 Warnings)

DIGITAL MEMS INCLINOMETER SYSTEM 1

• How to change batteries in a new style RST Inclinometer Reel

TIME DOMAIN REFLECTOMETRY 3

• How to setup a TDR Sensor and TDR200 Datalogger
• Documento de configuración de TDR
• TDR200 Setup Document