Connect the DTLink Logger and DTLink Wireless Hub to the PC running DT Logger Host Software via USB Cables and open the DT Logger Host Software.


In Connections Tab, select DTLink Settings and press Enable Edit button, enter coq in Password.

Enter the DTLink Hub Address, Network ID and DTLink Logger Address in the dialog boxes. Press on Update Logger button to update devices. 

It will show Update successful at the end of the process.



Press on Query DTLink button to check if the communication has been established successfully.

Press on Discover to automatically detect the DTLink Logger and it will show up on Wireless Logger List. 

To manually enter the logger, press on Modify List button  


Then Add new, enter the DTLink Logger details as shown below.


Press OK and the DTLink Wireless Hub will be connected to the DTLink Logger.



To read the DTLink Logger, select the DTLink Logger from the list of loggers and press Connect.

The status tab will show the details of the DTLink Logger being connected.

Press Collect Data button to get data from the DT Logger memory, then either Append or Overwrite data to existing data records in the PC data files. 

Press on View Recent file to view recently downloaded data in Data Viewer.