DT LINK WIRELESS DATA COLLECTION FROM DATA LOGGERS
DT LINK is a wireless connection to RST DT Series Data Loggers for quick collection of sensor data. It is ideal for data loggers situated in ‘point-to-point’ and line of sight settings where access may be limited, hazardous or disruptive. DT LINK is an alternative to USB wired connections and offers low power consumption and long battery life.
Scenario: customer needs to connect a DTLink Logger to a DTLink Wireless Hub. Solution: Connect the DTLink Logger and DTLink Wireless Hub to the PC running...
Wed, 30 Mar, 2022 at 10:29 AM
Connect the DTLink Logger and DTLink Wireless Hub to the PC running DT Logger Host Software via USB Cables and open the DT Logger Host Software. In Co...
Wed, 27 Oct, 2021 at 11:42 AM
Synopsys: When customer have a normal DT Logger and would like to upgrade it to have DT Link feature. Following the steps below to do the upgrade and se...
Fri, 13 May, 2022 at 4:15 PM
DTLink Hubs have high bandwidth (200k) modules installed. Assuming that DTLink module (200k) is installed properly in the logger socket of the data logger,...
Mon, 27 Jun, 2022 at 1:07 PM
To setup more than one DT Link Hub to connect to the same series of data loggers, the DT Link hubs must be set with the same Network ID. When the DT dat...
Mon, 27 Jun, 2022 at 1:11 PM
Connect the DTLink Logger and DTLink Wireless Hub to the PC running DT Logger Host Software via USB Cables and open the DT Logger Host Software. In Conne...
Tue, 28 Jun, 2022 at 11:23 AM