FLEXDAQ DATA LOGGERS

Ideal for remote monitoring in both common and demanding geotechnical conditions

How to Set up a wireless communication between a DT series Data Logger with a L900 RSTAR Node and FlexDAQ with L900 RSTAR RTU using DT Logger Host Software.
Scenario: customer needs to connect a DT Series Data Logger to a FlexDAQ via RSTAR L900 RTU/ Node and DT Logger  Host Software. Solution: follow the ste...
Thu, 9 Nov, 2023 at 7:23 AM
How to setup CR6 with LoggerNet (applicable to other CR series loggers)
Scenario: Customer needs to setup a Campbell Scientific CR6 Logger in a LoggerNet to control the FlexDAQ Unit. Solution: Follow the steps in the guide belo...
Thu, 8 Jul, 2021 at 3:47 PM
How to update table definitions to fix common issue with data collection
Sometimes, the data table collection show message that the table is not collected. To fix data table not being collected from LoggerNet, click on the S...
Wed, 22 Jun, 2022 at 11:41 AM
How to update firmware of RTU to fix data error issues
Sometime the RTU Firmware is out of date and needs to be updated with the latest version for the best performance. To update the firmware for RTU, downl...
Wed, 20 Jul, 2022 at 11:44 AM
How to setup FlexDAQs to connect with a base station
Scenario: customer needs to connect a FlexDAQ via radio communication to a Base station, which is a system comprising of a NL200 Network Link Interface, a R...
Thu, 8 Jul, 2021 at 3:43 PM
How to update CR Datalogger Operating System
How to update the Campbell Scientific Data Logger Operating System Connect a PC with the Data Logger via USB Cable. Open LoggerNet / Utilities and Device C...
Wed, 22 Jun, 2022 at 2:16 PM
How to update the Campbell Scientific LoggerNet Software
How to update the Campbell Scientific LoggerNet Software Click on the New Version notification to Download the Campbell Scientific Software Updater and I...
Wed, 22 Jun, 2022 at 2:25 PM
How to setup a CR Logger to connect to a WIFI Network
How to connect a CR Logger to WIFI network. There is a video with detailed instructions here: https://www.campbellsci.cc/videos/cr6wifi-datalogger-setting...
Wed, 22 Jun, 2022 at 4:16 PM
How to reboot the CR Datalogger using Soft _Reset function
How to reboot the CR Datalogger using Soft _Reset function    Connect the LoggerNet with the CR Logger and open Public Table Click on and change the st...
Fri, 24 Jun, 2022 at 8:28 AM
How to troubleshoot an RSTAR FlexDAQ system
FlexDAQ Troubleshooting Check list:   1. Is the RSTAR Hub powered and running? Check that the battery and solar panel are connected. Check that the fus...
Wed, 10 Nov, 2021 at 8:59 AM