FLEXDAQ DATA LOGGERS
Ideal for remote monitoring in both common and demanding geotechnical conditions
How to Read the Data File using Excel: Open Excel program and browse to the file location Choose to read all files types Select Delimited and click on N...
Wed, 13 Oct, 2021 at 12:25 PM
Scenario: Customer have a FlexDAQ and would like to set up a Cellular communication to enable the system to be accessed via LoggerNet. Solution: Use a CELL...
Fri, 15 Oct, 2021 at 10:15 AM
When you want to change the configuration of DT Data Loggers or RTU, there are commands that could be sent to the DT Data Loggers or RTU via Hyperterminal ...
Fri, 22 Oct, 2021 at 2:16 PM
When the DT Logger is synched with a FlexDAQ, the interval options settings will be disabled in the DT Logger and the interval is set in the LoggerNet when ...
Thu, 28 Oct, 2021 at 10:17 AM
To send a new program to a Campbell Scientific CR xxx Logger, please follow the steps below. 1. Go to Connect Menu: 2. Choose the FlexDAQ station with...
Wed, 1 Dec, 2021 at 8:37 AM
Situation: When there is a remote server connected to a hub via LoggerNet, using an IP address. Normally, there will be few steps to setup the server to ...
Thu, 16 Dec, 2021 at 8:59 AM
How to change / Add a new Reading Interval in an RSTAR Program, if there was no reading interval, e.g. for 3 hours (180 minutes), in the existing program. ...
Mon, 10 Jan, 2022 at 3:20 PM
Many cases, you want to Connect a CR Logger to LoggerNet using Device Configuration Utility by Go to LoggerNet > Utilities > Device Configuration ...
Tue, 14 Nov, 2023 at 11:24 AM
Some times, you receive a CR Basic program compiled with a higher version of CR Basic Editor and try to compile before send it to the CR Logger but it ...
Mon, 31 Jan, 2022 at 1:37 PM
How to retrieve a program from FlexDAQ To retrieve a program from a Campbell Scientific CR xxx Logger, please follow the steps below. 1. Go to ...
Fri, 3 Mar, 2023 at 11:58 AM