Issue with connecting LoggerNet with CR Logger using Device Configuration Utility : RST Instruments Ltd

Issue with connecting LoggerNet with CR Logger using Device Configuration Utility Print

Modified on: Tue, 14 Nov, 2023 at 11:24 AM

Many cases, you want to Connect a CR Logger to LoggerNet using Device Configuration Utility by

Go to LoggerNet > Utilities > Device Configuration Utility

Select CR6 Series,

select the right Communication Port, e.g. Com11 for USB Connection (Check using Device Manager for the right port).

but after you have already typed in PakBus Encryption Key if there is one and there is an error message as shown below.

The solution could be to install your LoggerNet software with USB Driver and upgrade your LoggerNer software to the latest version from Campbell Scientific website's download area at https://www.campbellsci.com/downloads/loggernet-patch

Did you find it helpful? Yes No

Issue with connecting LoggerNet with CR Logger using Device Configuration Utility Print

Related Articles